CITROEN C4X - Page 262

260
MyCitroën Drive Plus
Pairing procedure from a device
From the Bluetooth
®
menu on your mobile
device, select the system’s name from the
list of detected devices.
In order to make your system’s
Bluetooth
®
visible, rst open the "My
Devices" menu on the system.
Continue the rst connection procedure
proposed by the system and on the device.
For example: validating pairing codes.
Pairing procedure from the system
Press the "Settings" application.
In the list, select the "Connectivity" tab.
Select "My Devices".
Select the name of the mobile device that
you want to connect, from:
– The list of known devices (if the device has
already been connected to the system).
or
– The list of detected devices (if the device
has never been connected to the system or
previously deleted from the system).
A mobile device already connected to the
system will be able to reconnect
automatically when the vehicle is started,
once the user prole has been selected.
Automatic reconnection is put on hold as
soon as the "My Devices" menu is opened.
This is to allow the system to make its
Bluetooth
®
visible for the connection of a new
device.
The system is disconnected when the driver’s
door is opened and the ignition is switched
o󰀨.
Automatic reconnection
The system allows automatic reconnection of
devices already connected and detected when a
user prole is selected.
The priority reconnected devices are those which
have been linked to the selected user prole or,
failing this, the last connected devices.
Wi-Fi connection
The system has an external Wi-Fi connection
mode for performing system updates.
Press the "Settings" application.
In the list, select the "Connectivity" tab.
Select "Wi-Fi".
Activate/Deactivate "Wi-Fi".
The system starts a search for
nearby Wi-Fi networks. This may take a few
seconds.
Select the Wi-Fi network to connect to and enter
its password.
To protect your system, only networks
with a su󰀩cient level of security are
allowed to connect. WPA2 encryption level,
equivalent to a domestic level, is required.
Any network already connected to the
system will reconnect automatically as
soon as it is detected by the system and after
having previously activated the Wi-Fi function.
The Wi-Fi connection of the system to a
device already connected using a Mirror
Screen
®
wireless connection is not possible.
In this case, favour a Mirror
Screen
®
connection using the USB socket.
Device management
For each device already connected to the
system using a wireless connection (Bluetooth
®
or wireless Mirror Screen
®
connection), it is
possible to determine a preferred connection
mode (depending on the functions the device
can support). It is therefore possible to determine
whether the device should be connected using
a wireless Bluetooth
®
connection or a wireless
Mirror Screen
®
connection each time the system
is started once the prole is chosen.
Press the "Settings" application.
In the list, select the "Connectivity".
Select "My Devices" to display the list of
paired devices.
Press this button to manage the
connection of a device.