50
Ease of use and comfort
► Lower the head restraints.
► If necessary, move the front seats forward.
► Check that no person or object might interfere
with the folding of the backrests (e.g. clothing,
luggage).
► Press the backrest release grip 1.
► Guide the backrest 2 down to the horizontal
position.
When the backrest is released, the red
indicator in the release grip is visible.
Repositioning the backrests
First check that the outer seat belts are
lying vertically at alongside the backrest
latching rings.
► Put the backrest 2 in the upright position and
push it rmly to latch it home.
► Check that the red indicator is no longer
visible in the release grip 1.
► Ensure that the outer seat belts were not
trapped during the operation.
Please note: an incorrectly latched
backrest compromises the safety of
passengers in the event of sudden braking or
an accident.
The contents of the boot may be thrown
forwards - risk of serious injury!
Heated seats
The control knobs for each side seat are located
at the rear of the centre console.
► Turn the corresponding knob to switch on and
select a setting:
• 0 = o.
• 1 = low.
• 2 = medium.
• 3 = high.
The function is active only with the engine
running and when the outside temperature is
below 20°C.
Do not use the function when the seat
is not occupied.
Reduce the heating intensity as soon as
possible.
When the seat and passenger compartment
have reached a satisfactory temperature,
switch the function o; reducing electrical
To Next Page
Loading...
