88
Safety
These rings are located behind zips.
The 2 latches on ISOFIX child seats are
secured to them.
– One ring B called the TOP TETHER for
attaching seats tted with an upper strap.
C4
C4 X
This system prevents the child seat from tipping
forwards in the event of a front impact.
This ISOFIX mounting system provides fast,
reliable and safe tting of the child seat in the
vehicle.
To secure the child seat to the TOP TETHER:
► Remove and stow the head restraint before
installing the child seat on this seat (ret it once
the child seat has been removed).
► Pass the strap of the child seat behind the
seat backrest, centring it between the openings
for the head restraint rods.
► Secure the upper strap hook to ring B.
► Tighten the upper strap.
When tting an ISOFIX child seat to the
left-hand rear seat of the bench seat,
before tting the seat, rst move the centre
rear seat belt towards the middle of the
vehicle, so as to avoid the seat interfering
with the operation of the seat belt.
An incorrectly installed child seat in a
vehicle compromises the child's safety in
the event of an accident.
Strictly observe the tting instructions
provided in the user guide supplied with the
child seat.
For information about the options for
tting ISOFIX child seats in your vehicle,
refer to the summary table.
Recommended ISOFIX child seats
Also consult the user guide from the child
seat’s manufacturer to nd out how to
install and remove the seat.
"RÖMER Baby-Safe and its ISOFIX base"
(size category: E)
Group 0+: from birth to 13 kg