CityBlitz CB020 - Assembling

36
EN
4.3 Pumping the Tires
• Unscrew the dust cap.
• Fit the pump head onto the valve.
• Pump the tire to approximately 40 to 60 psi.
• Screw the dust cap back in.
WARNING
Do not over-inate or under-inate the tires. Routinely check
the air pressure of the inated tire.
4.4 Assembling
1. Lift the handlebar (A) and lock the latch of the folding mechanism (B).
A
B
2. Place the product vertically on its tires and use the kickstand to park it.
CB020-BigTrend-IM-INT-V01.2.indb 36 20/12/2018 5:14 PM