Civacon ROM II Troubleshoot Manual

Civacon World Headquarters:
4304 Mattox Road
Riverside, MO 64150
816/741-6600
Fax: 816/741-1061
www.civacon.com
Technical Support Hotline:
800-5CIVACON (800/524-8226)
techsupport@civacon.com
©2002 Civacon CK-00107 • FMI1K4/02 • H52402PA
Civacon
ROM II
Troubleshooting Guide
$5
00 US
Other Components:
A
B
FIGURE 1
A) Retain Jumper
B) Auxiliary Inputs Jumper
Terminator
Optic Sensor
Optic System Tester
100 SW
Air Interlock
Switch

Civacon ROM II Specifications

General

Brand	Civacon
Model	ROM II
Category	Measuring Instruments
Language	English

Summary

Other Components

Terminator

Component used in optical systems for signal termination.

Optic System Tester

Device used for testing optical system functionality.

Optic Sensor

Sensor designed to detect optical signals within the system.

100 SW Air Interlock Switch

An air interlock switch utilized for system control.

Troubleshooting LED Statuses

Status: Ready to Load

Indicates the system is ready for loading operations.

Status: Solid red LED/Light on top sensor

Troubleshooting for a solid red light on the top sensor.

Status: All top red LED/Lights are flashing

Troubleshooting for all top red LEDs flashing.

Status: No LED/Lights lit

Troubleshooting when no LEDs are illuminated.

Status: Flashing red LED/Light in top sensor

Troubleshooting for a flashing red light on the top sensor.

Status: Solid red LED/Light on bottom sensor

Troubleshooting for a solid red light on the bottom sensor.

Status: Yellow power LED/Light lit, but no permit light

Troubleshooting yellow power light without a permit.

Status: Flashing red top sensor LED/Light in compartment 6

Troubleshooting flashing red light in compartment 6.

Status: Flashing red LED/Light on bottom sensor

Troubleshooting for a flashing red light on the bottom sensor.