Need help?Do you have a question about the Claas ARES 546 and is the answer not in the manual?
Tractor model, type, and serial number details.
Tractor compliance with European directives and regulations.
Essential safety precautions and warnings for tractor operation.
Identification and function of controls in the driving position.
Identification and function of dashboard controls.
Symbols and meanings of dashboard warning lights.
Explanation of primary and caution alarm lights and their indications.
Specifications for bulbs, towing sockets, and electrical connections.
ISO socket function for data communication with implements.
Location and function of front and rear lights, indicators, and beacons.
Location and allocation of fuses and relays in the fuse box.
Technical specifications for engine types across different tractor models.
Essential pre-start checks and safety procedures.
Step-by-step guide for starting the engine safely.
Fuel quality requirements, handling, and tank filling procedures.
Speed charts for QuadriShift transmission with various tyre sizes.
Operation of the hydraulic reverser lever for forward/reverse control.
Automatic gear shifting for optimal speed and engine use.
Engagement and disengagement of differential locks for traction.
Technical specifications for front axles, including steering angles and ratios.
How the front axle engages in different operating and automatic modes.
Management of the Proactiv front axle suspension modes.
Description of the control panel for TCE 15-25 linkage.
Explanation of different linkage operating modes.
Activating and adjusting the force control sensitivity.
Automatic management of wheel slip for traction.
Specifications for front linkage, capacity, and front PTO.
Operation of the front linkage system and valve control.
Procedures for starting and stopping the front PTO.
Overview of the Infotrac on-board computer and its symbols.
Detailed explanation of autotest, partial, and total event counter functions.
Procedure for calibrating the Infotrac operating speed.
Factors affecting correct tyre pressure and recommendations.
Understanding the mechanical ratio between front and rear axles for 4WD.
Method for adjusting the wheel track by swapping wheels or discs.
Tables of dimensions and weights for different tractor models.
Quantities of lubricants and fluids required for each tractor component.
Ballasting recommendations for front and rear of the tractor.
General advice on maintenance, cleaning, and welding.
User-performable maintenance tasks and frequency.
Tables for recording 500h, 1000h, and 2000h maintenance operations.
Pre-delivery inspection and mandatory routine maintenance schedule.
To Next Page
General
