Need help?Do you have a question about the Claas ARES 656 and is the answer not in the manual?
General| Number of cylinders | 6 |
|---|---|
| Max Speed | 40 km/h |
| Hydraulic pump flow | 110 l/min |
| Hydraulic System | Open center |
| PTO Speed | 540/1000 rpm |
| Hydraulic Flow | 110 L/min |
Driver familiarity with controls, clean steps, neutral position, ventilated areas.
Explains the function of various warning lights on the instrument panel.
Details on primary alarm lights and their meanings.
Procedure for starting the engine, self-test, warming up, and safety precautions.
Fuel quality requirements, handling, and filling precautions.
Automatic gear shifting based on engine speed and pedal position.
Modes of operation for front axle engagement (operating, automatic, override).
Display and operation of active wheel slip management.
Activation, operation, and safety warnings for the Electropilot system.
Drive connection, clutch, gear reducer, PTO speeds, shaft, power, and rotation.
Lever controls for front linkage actuators and pressure take-offs.
Autotest start-up and functions of partial and total event counters.
Procedure for calibrating operating speed after tyre changes.
Table of lubricant and fluid capacities and recommended types.
Procedure for replacing engine oil and filter cartridges.
Procedure for replacing diesel fuel filter pre-filter and filter.
List of mandatory service operations after 100 hours.
List of mandatory service operations after 500 hours or 8-10 months.
To Next Page
