ARES 506-606 - 02.2005 - GB
G.18
ELECTROPILOT
ACTIVATION
When the tractor is started, the Electropilot is systematically
de-activated.
ACTIVATION METHOD
- Set the button (5) to "stop".
- Press button (1) to make the system operational. Indicator
light (2) indicates the system state.
SAFETY WARNING LIGHT (2)
- Steady "on": The system is operational.
- Light flashes slowly: The system indicates a fault but operation
is still possible. Refer to your approved CLAAS repair agent.
- Rapid flashing: Fault causing inhibition of the system. Stop all
activities and call your approved CLAAS repair agent.
- Out: The system is de-activated.
JOYSTICK OPERATION
The joystick allows activating two spool valves simultaneously (or
independently).
- The electro spool valve (A) is controlled by moving the lever
on the longitudinal axis "y".
- The electro spool valve (B) is controlled by moving the lever
on the lateral axis "x".
391hsn05
391hsn06
391hsn07
When the Electropilot is not in use (on the road,
etc.), set the button (1) to "OFF" (indicator light
(2) off).
3
4
1
2
5
7
X
Y
6
To Next Page
Loading...
