ARES 506-606 - 02.2005 - GB
F.3
FRONT AXLE ENGAGEMENT
OPERATING MODE
Engine stopped or forward speed nil : the front axle is
automatically engaged (safety, braking on the 4 wheels).
As it moves, the tractor resumes the situation memorised when
the engine stopped.
When the front axle is engaged, warning light (B) on the display
panel comes on.
AUTOMATIC MODE
The front axle is automatically engaged when the speed drops
below 14 km/h (light (B) on).
The front axle is automatically disengaged when the speed goes
above 14 km/h (light (B) off).
This mode is obtained by a single pressure on switch (I).
To disengage the front axle, press switch (I) again.
OVERRIDE MODE
The front axle is permanently engaged (warning light (B) flashes,
except if the differential lock is already engaged).
This is obtained by:
- Pressing switch (I) when the speed is higher than 14 km/h.
- Press switch (I) for more than 2 seconds when the speed is
lower than 14 km/h.
To disengage the front axle, press switch (I) again.
BRAKE SYSTEM
For reasons of efficiency and safety, the automatic system
manages the front axle engagement to guarantee braking on the
4 wheels ; one condition : the pedals must be coupled together.
As soon as the brake pedals are applied, the automatic system
engages the front axle and the light comes on. The Drivetronic
disengages the front axle and turns off light (B) as soon as the
action on the brake pedals ceases.
601hrn01
602hsn01
D
B
I
To Next Page
Loading...
