ARES 506-606 - 02.2005 - GB
E.13
DIFFERENTIAL LOCK
- Do not wait for one wheel to slip before locking the differential.
- Do not lock the differential when the wheel is slipping at high
speed.
- When the tractor is started the differential is always unlocked,
whatever the state memorised when the engine stopped.
ENGAGEMENT
Engagement of the rear and front differential lock is obtained by
pressing the button (E) (Ares 696). For the other models
(self-locking front axle) the differential lock engagement is
obtained by pressing switch (E). The engagement takes place at
a speed lower than 14 km/h. Lights (K) and (J) come on and the
front axle is engaged.
To disengage the differential lock(s), press switch (E) again.
Light (K) goes out (the front axle remains engaged and light (J)
remains on).
ELECTRONIC MANAGEMENT OF THE REAR
AND FRONT DIFFERENTIALS BY
DRIVETRONIC
TEMPORARY DISENGAGEMENT
During implement lifting if the linkage rods are not in the working
position, the differential lock is disengaged.
When the linkage returns to the working position the differential
lock is automatically reengaged.
601hsn39
602msn01
1J
1
K
To Next Page
Loading...
