ARES 506-606 - 02.2005 - GB
M.2
OPERATIONS MANDATORY UNDER THE TERMS OF THE CONTRACTUAL
GUARANTEE
PRE-DELIVERY INSPECTION - HANDING OVER TO THE CUSTOMER
a)
Pre-delivery inspection
Your CLAAS agent is responsible for preparing your tractor before delivery:
- Cleaning.
- General checks.
- Inspections.
He must stamp and sign it after checking and confirming the service handbook inspections.
If you wish, he can also install any certified equipment or after-sales options (air-conditioning, front power take-off and linkage,
radio, etc.).
b)
Handing over to the customer
Your supplier must provide you with the use and servicing handbook on delivery. He must explain this document and carry out
a test, with you, in the field in order to familiarise you with your new tractor, and to answer all your questions.
The "Acknowledgement of receipt", "Pre-delivery inspection" and "Delivery to the customer" sheets (to be found in the service
handbook) must be filled in and signed by the technician responsible for the handover, and signed by the user.
On of the copies of the acknowledgement of receipt remains in the service handbook which is given to the user. The other copies
are intended for CLAAS.
MANDATORY ROUTINE MAINTENANCE
IMPORTANT: After the first hours of use, the engine, gearbox and front axle go through a running-in period, so it is
important to observe the first service procedures as described in the following table
Note:
For subsequent maintenance operations, refer to the service operations tables given in section L.
Operations to be
carried out after
ENGINE TRANSMISSION - HYDRAULIC SYSTEMS FRONT AXLE
Oil Filter Oil Filters Strainer Oil
100 hours X X X X
500 hoursXXXXXX
To Next Page
Loading...
