Need help?Do you have a question about the Claas JAGUAR 830 and is the answer not in the manual?
Explains abbreviations like LHS and RHS used throughout the guide.
Provides essential safety advice for operating and maintaining the machine.
Details power transmission from engine to cutting cylinder and accelerator.
Explains the functions of the Info Key, Hot Key, CEBIS switch, and navigation keys.
Covers main drive, steering, header height, and cruise controls.
Manages AUTO FILL, chute, attachment, additive, and 4 Trac controls.
Controls attachment movement, spout, chute, and roller reverse.
Manages AUTOCONTOUR, AUTOPILOT, and HOTKEY operations.
Displays speed, fuel, coolant, gear status, and user-defined data.
Shows AUTOCONTOUR, cutting height, engine data, performance, and camera selection.
Accesses main menu, messages, and machine settings.
Explains how to adjust frequently changed settings using the HOTKEY.
Details specifications for V-Classic 28, 24, and 20 feed rollers.
Advises on plastic strips and the grain collection plate for optimal feeding.
Describes the metal detector's function to stop the machine on foreign objects.
Explains the Stop Rock system for detecting stones and halting feed rollers.
Provides step-by-step instructions for removing the feed rollers.
Details how to V open the feeder housing for blade inspection.
Explains how to determine sharpening frequency and adjust cycle counts.
Details adjusting the concave for optimal crop flow.
Provides guidance on shear bar adjustment and wear assessment.
Lists and describes different Multi Crop Cracker variants.
Guides on how to completely remove the corn cracker from the machine.
Explains manual adjustment of the accelerator gap and paddle types.
Explains how chute extensions are added based on header width.
Details OPTI FILL and AUTO FILL systems for automated trailer filling.
Lists benefits such as optimized filling and ease of use.
Explains standard additive system and optional ACTISILER.
Lists dosing modes for additive systems.
Explains sprocket selection for chop lengths and gearbox use.
Highlights the centre sensing wheel for improved ground adaptation.
Explains activation and deactivation of the ACTIVE CONTOUR feature.
Lists maintenance tasks for prior to harvest, daily, 50, and 500 hours.
Outlines general adjustments for sensing wheels, sprockets, and bearings.
Describes two design variations and their suitability for different crops.
Explains adjusting intake speed, paddle roller height, and cutting height.
Lists the available working widths for the ORBIS header.
Explains intake speed adjustment using gearboxes for various chop lengths.
Details adjustment of divider rollers, cob guide tubes, and ground contact.
Guides on adjusting divider tips and scrapers for optimal crop flow.
Lists maintenance checks for daily, 50-hour, 500-hour, and annual intervals.
Explains the system that counteracts pitching movements during road travel.
Describes how to activate the feature using the multifunction lever and CEBIS monitor.
Identifies causes for failed cuts and points for checking.
Discusses issues with unchopped leaves and related checks.
Lists points for crop grinding and adjusting cracker clearance for grain.
Lists part numbers for JAGUAR, PICK UP, and ORBIS components.
Lists part numbers for DIRECT DISC and maintenance items.
To Next Page
General
