Need help?Do you have a question about the Claas LEXION 560 and is the answer not in the manual?
General| Brand | Claas |
|---|---|
| Model | LEXION 560 |
| Category | Farm Equipment |
| Language | English |
Guidance on using the manual, its validity, and general machine information.
Regulations and safety requirements for operating the combine on public roads.
Location and meaning of machine, engine, and component identification plates.
Access points to operator workplace and maintenance areas on the machine.
General safety, warning signs, intended use, misuse, and operational safety.
General safety information and explanation of the CE mark.
Safety precautions for front attachments and other machine components.
General safety rules for maintenance and repair work.
Detailed specifications for specific CLAAS LEXION models.
Detailed specifications for CLAAS LEXION 530 and 520 models.
Detailed specifications for the CLAAS LEXION 510 model.
Covers initial checks and procedures before operating the machine.
Details on cab operation, climate control, and operator interface elements.
Guidelines for operating the combine using mechanical controls.
Step-by-step instructions for installing the combine harvester's cutterbar.
Detailed procedures for safely removing the combine harvester's cutterbar.
Overview of the CLAAS CEBIS on-board information system.
Using the CEBIS monitor, controls, and multifunction handle.
Detailed procedures for calibrating and performing yield measurements.
Instructions for operating and adjusting the HP feed rake conveyor.
Details on the threshing mechanism, stone traps, and concave settings.
Troubleshooting guide for common machine problems, causes, and remedies.
Key maintenance instructions and safety rules for the basic machine.
Detailed procedures for hydraulic system maintenance and checks.
Details on transmission systems, gearboxes, and brake operation.
Detailed diagrams and procedures for drive belts and chains.
Key maintenance instructions and safety rules for the engine.
Maintenance and operation of the fuel system and engine oil.
Maintenance and operation of the engine cooling system.
Maintenance and operation of the dry-type air cleaner.
Details on lubrication points and greasing cycles.
Schedule and frequency for greasing lubrication points.
To Next Page
