Nitrogen Generators Nitro35 Nitro70
15
4.3.3.
Power supply
c
It is mandatory to apply literally following instructions for your own
safety.
Electric installation must comply to the law, particularly for what concerning the
protection line.
c
Warnings for a correct installation:
• Do not use extension cables, adaptors or multiple plugs; when necessary, please
substitute the Schuko plug with another adequate plug.
• Do always connect the protection conductor.
• The power supply plug must be positioned in a easily accessible area.
CONNECTION
• Please find the connection (1) for the power supply cable the on the rear of the
generator.
• Before of connecting the cable, please be sure that the POWER switch is in OFF
position.
• Please connect the power supply cable (2 m lenght, plug IEC320 C13 Schuko)
supplied with the generator.
To Next Page
Loading...
