Need help?Do you have a question about the Claind Nitro70 and is the answer not in the manual?
Lists critical safety warnings including heat, rain, wind, and electrical hazards.
Discusses suffocation risks associated with nitrogen and ventilation requirements.
Details maximum pressure limits and the function of safety valves.
Provides contact information for CLAIND technical support and disclaims liability for misuse.
Lists all items included in the generator package.
Presents general requirements including dimensions, weight, noise, and operating temperature.
Specifies supply voltage and nominal power for the generator.
Explains factors affecting nitrogen flow rate and purity.
Details the components of the generator, including frontal and rear views.
Identifies and describes the controls and indicators on the generator's front panel.
Describes the connections and labels located on the rear of the generator.
Provides guidelines for preparing the installation environment regarding moisture, particulate, and temperature.
Covers handling, unpacking, and general guidelines for positioning the generator.
Explains the process of removing the generator from its pallet using eyebolts.
Recommends minimum access space around the generator for user and maintenance.
Details the procedure for assembling the feet and stabilizer brackets for stability.
Illustrates and describes the pneumatic connections for the generator and plant components.
Explains nitrogen production purity, flow rate, and outlet pressure relative to intake pressure.
Specifies requirements for inlet compressed air quality, including dew point, oil, and particulate content.
Outlines mandatory safety instructions and connection procedures for the power supply.
Advises on forecasting spare gas sources in case of supply interruption.
Recommends keeping original packing for future transportation.
Provides step-by-step instructions for safely stopping and disassembling the generator.
Gives instructions for transporting the generator, emphasizing vertical position and packaging.
Explains the functions of the generator's keypad and the structure of its display.
Details the sequence of operations for the initial start-up and configuration of the generator.
Describes the procedure for turning the generator on, including the depressurization cycle.
Explains how to start Nitrogen production after the generator is ready.
Details how to stop the generator during operation, including depressurization.
Describes the correct procedure for switching off the generator.
Explains how to display the generator's operating mode and parameters.
Describes the main display message and how to access detailed operating information.
Explains how to view the total accumulated working hours of the generator.
Outlines the process for accessing and modifying generator parameters like message language.
Refers to the "Maintenance" section for editing maintenance-related parameters.
Describes how to adjust the minimum nitrogen pressure alarm threshold.
Explains how to adjust the nitrogen outlet pressure using the regulator knob.
Describes how the generator alerts the user about expiring consumable components and maintenance requests.
Lists available maintenance kits and their recommended substitution intervals.
Provides a recommended maintenance schedule based on generator working hours.
Explains the cause of the insufficient nitrogen pressure alarm and how to resolve it.
Describes the high compressed air alarm and the procedure to exit alarm mode.
General| Brand | Claind |
|---|---|
| Model | Nitro70 |
| Category | Portable Generator |
| Language | English |
To Next Page
