Claind Nitro70 - Description of the generator; Equipment supplied; Technical specifications

Description of the generator
6
3. Description of the generator
3.1. Equipment supplied
Unless differently agreed, the supply includes:
• n°1 Nitrogen generator model Nitro35 or Nitro70;
• n°1 certificate of conformity of tank and safety valve, that you can found inside
the generator;
• n°1 cable for the electrical mains;
• n°2 male fitting for plastic tube external diameter=10mm;
• n°1 CD user’s manual;
• n°2 eyebolts for lifting the generator;
• n°4 feet;
• n°4 stabilizer brackets;
• n°8 screw diameter 6mm, lenght 20mm;
• n°8 washers.
3.2. Technical specifications
3.2.1. General requirements
* with the exception of a peak of 63 dBA for second every minute.
Dimensions Width 26,5 cm
Depth 75 cm
Height 92 cm
Weight of Nitro35 75 kg
Weight of Nitro70 90 kg
Packing dimensions Width 80 cm
Depth 120 cm
Height 115 cm
Gross weight of Nitro35 95 kg
Gross weight of Nitro70 110 kg
Noise (1m from the front panel) 50 dBA*
Working temperature from 5°C to 40°C
Protection rating IP20