Use
16
Press operative key START/STOP.
The productive cycle is started-up and the following message appears: I
PRODUCTION
6.5.
Stop of the generator
Any moment during production, it is possible to arrest the generator pressing the
START/STOP key.
During depressurization, that usually lasts 30-60 seconds, the following message
is displayed:
PLEASE WAIT
UNDER DEPRESSURIZATION
e
PLEASE NOTE: during an allarm block of production, the START/STOP key isn’t
operative.
At the end of depressurization, the following message appears:
GENERATOR READY
Now you have two alternatives:
1. switch the generator OFF using the POWER switch (see par. 6.6.);
2. restart production pressing the START/STOP key (see par. 6.4.).
To Next Page
Loading...
