**FOR AN ALTERNATIVE OPTION FOR INSTALLING THE TENT, PLEASE REFER TO THE SETUP VIDEO
INSTRUCTIONS FOUND THROUGH THE QR CODE ON PAGE 1 OF THIS MANUAL**
STEP 8 – TENT INSTALLATION
STEP 7 – ROPE & SPREADER POLE
Slide Hoop Pole through
sleeve in front of tent
Attach porch
Hoop Pole to
bracket
A. Attach the Rope #101095 to the
sled by routing it through the
predrilled holes on the angled end
of the sled.
B. Put the Rear Spreader Pole
#101074 into the shelter.
A. Drape the tent over the Hoop Poles. Attach the tent to the poles on the inside with the Velcro straps.
B. Slide the porch Hoop Pole #104145 through the sleeves in the front of the tent.
C. Attach the porch Hoop Pole to the mounting brackets on either side.
To Next Page
Loading...