Clarion CZ105BT - Radio Operation; Source, Band Selection, and Tuning; Station Storage and Seeking; Local Seeking and Area Settings

Radio Operation
English
Owner’s Manual
CZ105BT
7
[ ] Tuning Up / [ ]
Tuning Down Buttons
Select Radio As Playing
Source
Selecting The Radio Band
1. Press the [ ] / [ ] button change
intervals step by step.
Press the [ SOURCE ] button to select the
RADIO mode.
Press the [ BAND / SEARCH ] button on the
front panel to select one Radio band among F1,
F2,F3 ,AM.
2. Press and hold the [ ] / [ ] button
to seek to the next strongest station.
Manual Store
Recall The Stored Stations
Local Seeking
when one expected radio station has been
detected, press and hold number button 1-6 to
store it in the memory.
Press one numeric button among 1 to 6 on the
front panel to select the corresponding stored
stations.
When LOCAL seeking is ON, only those radio
stations with strong radio signal could be
received.
To select LOCAL function, press the [ MENU ]
button on the front panel, then press the [ ]
/ [ ] button repeatedly until LO or DX display
on the LCD, rotate the [VOLUME] knob to select
local or distant mode.
Presets Scan
Preset scan receives the stations stored in
preset memory in order. This functionis useful
when searching for a desired station in memory.
1. Press the [AS/PS] button.
2. When a desired station is tuned in, press the
[AS/PS] button again to continue receving
that station.
Auto Store
Only stations with sufficient signal strength will
be detected and stored in the memory.
Press and hold the [AS/PS] button to start
automatically select six strong stations and store
them into sixpresets. The new stations replace
any stations already stored in the band.
Area Set
This option allows you to select the appropriate
frequency spacing for your area.
1. Press the button.
2. Press the [ / ] button to select AREA
3. Rotate the [VOLUME] knob to select:
"U.S.A", "LATIN”,"EUROPE", "ASIA"
4. Press the [MUTE] button to confirm.
[MENU]
" "