Clarion DRX6575RZ - Detachable Control Panel (DCP); DCP Removal and Installation; DCP Handling Safety

The
control
panel
can
be
detached
to
prevent
theft.
When
detaching
the
control
panel,
store
it
in
the
DCP
(DETACHABLE
CONTROL
PANEL)
case
to
prevent
scratches.
We recommend taking the DCP with you when leaving the car.
Removing the DCP
1. Hold down POWER button [3] for 1 second or
longer to switch off the power.
2. Deeply push in OPEN button [1] to unlock the
FLIP DOWN PANEL.
* [fthe FLIP DOWN PANEL does not open fully,
gently open it with your hand.
____ ACAUTION
Be sure to close the HOLD FLAP for safety
when removing the DCP.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
2. Insert the left side of the DCP into the main
unit.
À CAUTION
+ The DCP can easily be damaged by shocks.
After removing it, be carefui not to drop it
or subject it to strong shocks.
° Ifthe FLIP DOWN PANEL is kept open, the
DCP may drop due to vibration of the car.
This results in damage to the DCP. So close
the FLIP DOWN PANEL or remove the DCP
to store into the case.
° The connector connecting the unit and the
DCP is an extremely important part. Be care-
ful not to damage it by pressing on it with
fingernails, screwdrivers, etc.
Note:
° lfthe DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
DRX6575Rz 7