2
ENGLISH
THANK YOU
Congratulations on your purchase of the Clarion XC660DSP System Integration
processor. The XC660DSP was designed in the United States to offer sound quality that
exceeds that of many processors costing signifi cantly more money.
When installed and confi gured properly, the XC660DSP will bring a new level of realism
and impact to your mobile entertainment system. To get the best performance from your
XC660DSP, Clarion recommends that you have this processor installed and confi gured by
an experienced professional.
XC-TUNE SOFTWARE AND DSP SETUP
The XC660DSP was designed to provide the highest possible performance from your
mobile entertainment system. In order to maximize the processor’s ability to produce
a stable and accurate sound-stage, all controls for the amplifi er have been integrated
into the Digital Signal Processor (DSP) circuitry. There are NO analog controls on this
processor.
A personal computer (Laptop, Netbook or Tablet) running a Windows operating system
(Version 7, 8 or 10) with a USB 2.0 port is required to set up the XC660DSP using the XC-
Tune software suite. The use of an Apple- or Linux-based computer running Windows in
any kind of emulator mode (BootCamp, Virtual Machine, Parallels, etc) is not supported.
Computers connected to the XC660DSP should ideally be battery powered. The potential
for ground loops from 12V Inverters or external power sources can lead to damage. If you
aren’t 100% sure, please operate the computer from battery power alone. Damage caused
by improper communication with the XC660DSP is not covered under the manufacturer’s
warranty.
The XC-Tune Operators Manual can be found at: www.clarion.com/ca/ on the XC660DSP
product page.
ABOUT THE MANUAL AND WARRANTY
This manual describes the basic requirements to install the Clarion XC660DSP. The
installation and confi guration of this processor can be quite complex. If you do not possess
the necessary knowledge, experience and/or tools to perform this installation, please
contact your local authorized Clarion retailer to arrange for professional installation. Keep
all instructions and your purchase receipt for future reference and warranty purposes.
XC660DSP HARDWARE FEATURES
The XC660DSP includes the following features:
• 24 Bit Digital Signal Processor
• Three 24-bit, 96kHz Input ADC
• Three 24-bit, 192kHz Output DAC
• Three Dedicated High-Current Dual Output Driver Op-Amps
• 6 Channel RCA Input
• 6 Channel RCA Output
• DSP Confi gurable BC2 Remote Level control Included
• External Preset selection inputs
• Speaker level input RCA adapters included
• TRI-ON Auto-Sense turn-on detection for OEM integration
To Next Page
Loading...