3
ENGLISH
XC660DSP CONNECTIONS
1. BC2 Remote Level Control Connection Jack
2. Data Communication LED
3. Power LED
4. XC-Tune Bootloader Activation Switch
5. Micro-USB Connection Port
6. TRI-ON Channel 1 Auto Sensing Control Switch
7. RCA Input Jacks
8. RCA Output Jacks
9. Power and Control Connector
GENERAL FUNCTION EXPLANATION
BC2 Remote Level Control Connection Jack
The XC660DSP includes a BC2 remote level control and a connection cable. Plug the
BC2 cable into this jack and program the function of the BC2 in the XC-Tune software.
Data Communication LED
This LED will illuminate when data is be sent to or from the programming computer
Power LED
This LED will illuminate when the XC660DSP has turned on
XC-Tune Bootloader Activation Switch
This microswitch is used to put the amp into Bootloader mode. The latest version of the
XC-Tune software will automatically put the processor into Bootloader mode to perform
software updates. It is unlikely that this switch will need to be used.
1 2 4
3
5 6 7
8 9
To Next Page
Loading...