2-8
Know your Tow Tractor
Alarms
The ZAPI MDI-CAN gives
indication of the Alarms of
the controllers to which it is
connected via CAN-BUS,
with a corresponding code.
When an Alarm is generated,
the Red LED blinks to attract
the attention of the operator.
The symbol of Monkey
Wrench also appears. The
string shown on the display
is XXAYY, where XX and
AYY represent respectively
the alarmed node and the alarm code. The alarm code
meaning must be present in the controller user manual.
Decoding of the alarms displayed on the MDI-CAN
Using the indication given by the MDI-CAN and after reference
to the following table, the operator can solve the problem, if the
failure is not serious. It will also be necessary to refer to the
paragraph describes the Alarms in the Service Manual of the
relevant controller.
If the Alarm information suggests or indicates a serious
problem, the operator will be able to give useful information to
the Servicing Dealer, thereby reducing down time with relative
costs savings.
To Next Page
Loading...
