5-1
Lubrication and Maintenance Plan
Service to be done in accordance of list (1/2)
Type of lubricant
working hours
B Brake fluid
G Multipurpose grease
T Drive axle oil Type of lubricant
Item number in the drawing
Check the tightening torque of critical fastening ele-
ments
a
Carry out one equalization charge a
Check drive axle oil level 1 T a
Check that drive axle air breather ventilation is free 1 a
Grease steering gear 2 G a
Check brake linings condition and wear 5 b
Check protection circuit
(at least once a year, by an expert only)
c
Check insulation resistance
(at least once a year, by an expert only)
c
Check layout of cables and connectors for corrosion c
Replace drive axle oil 1 T d
Check / lubricate steer axle wheel bearings 3 G d
Replace brake fluid (min. every year) 4 B c
Checking Contactor a
Service brakes, braking performance a
Parking brakes, braking performance a
Brake system check damgaes on hoses, piping, link-
age and cable looseness
c
Check rim and tyre condition (Damage, threat depth,
screws and nuts, air pressure, abnomal noise)
a
Battery condition a
To Next Page
Loading...
