8
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
OPERATION
Forward/Reverse rotation is selected by pushing the combined Forward/
Reverse knob/power regulator in the direction shown by the arrow on the
back of the wrench.
1. For normal tightening, the wrench
should be operated in the forward
(F) direction.
2. For loosening, the wrench should
be operated in the reverse (R)
direction.
FITTING THE IMPACT SOCKET
1. Select the impact socket you
require, which must be in good
condition and fit the tool exactly.
2. Push the socket onto the square
drive as shown.
WARNING: WAIT UNTIL THE ANVIL HAS STOPPED ROTATING BEFORE
OPERATING THE FORWARD/REVERSE BUTTON.
WARNING: NEVER USE STANDARD SOCKETS. THESE MAY SHATTER WITH
SERIOUS CONSEQUENCES. ONLY USE IMPACT SOCKETS DESIGNED FOR
USE WITH IMPACT TOOLS.
To Next Page
Loading...