11
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
9. Use the anchors (13) to fix the two side beams to the ground along each
side.
The shed is now ready for use.
USING THE SHED
1. Check periodically and tighten all hardware if needed..
2. Open the door with the help of an assistant, rolling the fabric up until the
door can be held in position above the opening using the webbing straps
and buckles.
DISASSEMBLY
To dismantle, execute all instructions in reverse order.
Store your shed in a cool, dry location between seasons to prolong the usable
life of all components. Components are not equally durable and will require
replacement over time at differing intervals.
PLEASE RE-READ ALL WARNINGS ON PAGE 2 OF THESE INSTRUCTIONS. SAVE
THESE INSTRUCTIONS FOR FUTURE USE.
WARNING: IF POSITIONING THE SHED IN A WINDY LOCATION ALWAYS
ENSURE THE FRONT DOOR IS KEPT FULLY CLOSED TO PREVENT WIND
LIFTING THE SHED FROM INSIDE AND THAT THE SHED IS SECURELY
ANCHORED TO THE GROUND.
To Next Page
Loading...