Page 3 of 49
3.3.3 Changing Oil Filter Cartridge 26
3.3.4 Oil Specification 27
3.3.5 Oil Capacities 27
3.4 COOLING SYSTEM 27
3.4.1 Intended Engine Operating Temperature 27
3.4.2 Engine Coolant 27
3.4.3 Water 28
3.4.4 Coolant Capacities 28
3.4.5 Coolant Inhibitors 28
3.4.6 Procedure for Filling Engine 29
3.4.6.1 Partial Fill 29
3.4.7 Providing Adequate Raw Water Supply to the Engine Heat Exchanger 29
3.4.7.1 Raw Water Supply 29
3.4.7.2 Cooling Loop 30
3.4.7.3 Setting Raw Water Flow Rate 31
3.4.7.4 Raw Water Outlet 31
3.4.7.5 Raw Water Quality, Strainers and Deterioration of Heat Exchanger (or CAC) 32
3.4.7.6 Backflow Preventers 32
3.4.7.7 Raw Water Outlet Temperature 32
3.4.8 Flow Paths of Engine Cooling System 32
3.4.9 Important Service Notice 34
3.4.9.1 Water Pump Cavitation 34
3.5 ELECTRICAL SYSTEM 34
3.5.1 Wiring Diagrams 34
3.5.2 Checking Drive Belt Tension and Adjustment 35
3.5.3 Speed Switch 35
3.5.4 Magnetic Pick-Up 36
3.5.5 Mechanical Engine Control and Alarm Board (MECAB) Speed Switch Troubleshooting 36
3.5.6 Field Simulation of Pump Controller Alarms 38
3.5.7 Battery Requirements 39
3.6 ENGINE SPEED ADJUSTMENT 39
4.0 MAINTENANCE SCHEDULE 40
4.1 ROUTINE MAINTENANCE 40
5.0 TROUBLE SHOOTING 41
6.0 PARTS INFORMATION 41
6.1 SPARES 41
6.2 ENGINE MAINTENANCE PARTS LIST 41
7.0 OWNER ASSISTANCE 41
8.0 WARRANTY 41
8.1 GENERAL WARRANTY STATEMENT 41
To Next Page
Loading...
Need help?
General