To Next PageTo Next Page
Need help?Do you have a question about the Clarke DT2H-UFAA50 and is the answer not in the manual?
General| Power Output | 6.5 HP |
|---|---|
| Fuel Type | Unleaded Petrol |
| Fuel Tank Capacity | 3.6 Litres |
| Oil Capacity | 0.6 Litres |
| Starting System | Recoil Start |
| Max. RPM | 3600 RPM |
| Engine Type | 4-stroke, air-cooled |
Details identification plates, model numbering, and serial numbers for engine identification.
Provides essential safety rules and warnings for operating the engine safely.
Provides step-by-step instructions for starting the engine, including manual and automatic methods.
Covers diesel fuel specifications, testing, and maintenance requirements.
Specifies the required diesel fuel type and standards for Clarke fire pump drivers.
Provides instructions on how to check the engine oil level using the dipstick.
Details the procedure for changing the engine oil, including drain plug torque.
Specifies the recommended API symbol and SAE viscosity for engine oil.
Provides guidelines for selecting suitable engine coolant and its requirements.
Emphasizes the importance of coolant inhibitors for system protection and lists concentrations.
Explains how to set and verify the raw water flow rate for proper engine cooling.
Highlights the importance of strainer cleaning and potential issues with heat exchangers.
Provides troubleshooting for MECAB speed switch malfunctions indicated by flashing lamps.
Outlines the general warranty statement and responsibilities of manufacturer and dealer.
Details the warranty duration and coverage for Clarke-supplied components.
Mentions the warranty provided by the engine manufacturer (Doosan) for basic engine components.
