8
USING HEADPHONES
1. Insert your headphones into the headphone socket on the control housing.
Connecting stereo headphones automatically disconnects the loudspeaker.
Headphones give slightly more sensitivity as they reduce external noises which
can interfere with your ability to detect objects.
TROUBLESHOOTING
FALSE SIGNALS
• If you are getting false signals from electrical cables, try to lower the
sensitivity.
• The metal detector can give a false reading in areas which have a
high mineral content. In this case lower both the sensitivity and the
threshold and hold the search coil slightly higher than normal.
CAUTION: Set the volume to the lowest level before putting on the
headphones. Then adjust the volume to a comfortable level.
CAUTION: Do not wear headphones when operating near roads or
traffic.
To Next Page
