Need help?Do you have a question about the Clarke Strong Arm CCB1B and is the answer not in the manual?
General| Brand | Clarke |
|---|---|
| Model | Strong Arm CCB1B |
| Category | Construction Equipment |
| Language | English |
Identifies numbered holes for bending setup.
Explains the need for measurement devices for accuracy.
Describes using stops for consistent bend angles.
Explains the function of the stop block in preventing rotation.
Details how to correctly position the stop block for bending.
Describes installing the block support for stability.
Discusses clamping material for precision bends.
Details the correct orientation for the attachment.
Guides on marking and positioning material for bending.
Step-by-step guide for bending handles from round stock.
Step-by-step guide for bending handles from flat stock.
Instructions for creating a single tube clamp.
Instructions for creating a double tube clamp.
Guide for bending anchor bolts.
Information on bending U-bolts from round stock.
How to adjust for longer U-bolt lengths.
Notes on selecting dies for bend radius.
Table detailing setup for 1/4" round stock U-bolts.
Table detailing setup for 3/8" round stock U-bolts.
Table detailing setup for 1/2" round stock U-bolts.
Table detailing setup for 5/8" round stock U-bolts.
Overview of bending alphabet letters from flat stock.
Lists materials needed for Letter A.
First bend instruction for Letter A.
Second bend instruction for Letter A.
Final steps for completing Letter A.
Lists materials needed for Letter B.
First bend instruction for Letter B.
Second bend instruction for Letter B.
Third bend instruction for Letter B.
Final steps for completing Letter B.
Outlines the bend steps for Letter C.
First bend instruction for Letter C.
Second bend instruction for Letter D.
Final steps for completing Letter D.
Outlines the bend steps for Letter E.
First bend instruction for Letter E.
Second bend instruction for Letter E.
Final steps for completing Letter E.
Lists materials needed for Letter F.
Final steps for completing Letter F.
Lists materials needed for Letter G.
Bending instruction for Letter G.
Lists materials needed for Letter H.
Final steps for completing Letter H.
Lists materials needed for Letter I.
First bend instruction for Letter I.
Second bend instruction for Letter I.
Final steps for completing Letter I.
Lists materials needed for Letter J.
First bend instruction for Letter J.
Second bend instruction for Letter J.
Third bend instruction for Letter J.
Final steps for completing Letter J.
Lists materials needed for Letter K.
Bending instruction for Letter K.
Final steps for completing Letter K.
Lists materials needed for Letter L.
Preparation steps before bending Letter L.
First bend instruction for Letter L.
Second bend instruction for Letter L.
Final steps for completing Letter L.
Lists materials needed for Letter M.
Preparation steps before bending Letter M.
Final steps for completing Letter M.
Lists materials needed for Letter N.
Preparation steps before bending Letter N.
First bend instruction for Letter N.
Second bend instruction for Letter N.
Final steps for completing Letter N.
Lists materials needed for Letter O.
Final steps for completing Letter O.
Lists materials needed for Letter P.
Preparation steps before bending Letter P.
Final steps for completing Letter P.
Lists materials needed for Letter Q.
Final steps for completing Letter Q.
Lists materials needed for Letter R.
Final steps for completing Letter R.
Lists materials needed for Letter S.
Preparation steps before bending Letter S.
First bend instruction for Letter S.
Fourth bend instruction for Letter S.
Fifth bend instruction for Letter S.
Sixth bend instruction for Letter S.
Seventh bend instruction for Letter S.
Eighth bend instruction for Letter S.
Ninth bend instruction for Letter S.
Tenth bend instruction for Letter S.
Lists materials needed for Letter T.
First bend instruction for Letter T.
Second bend instruction for Letter T.
Final steps for completing Letter T.
Lists materials needed for Letter U.
Outlines the bend steps for Letter U.
First bend instruction for Letter U.
Second bend instruction for Letter U.
Lists materials needed for Letter V.
Preparation steps before bending Letter V.
First bend instruction for Letter V.
Second bend instruction for Letter V.
Lists materials needed for Letter W.
Preparation steps before bending Letter W.
First bend instruction for Letter W.
Second bend instruction for Letter W.
Lists materials needed for Letter X.
Bending instruction for Letter X.
Final steps for completing Letter X.
Lists materials needed for Letter Y.
Preparation steps before bending Letter Y.
First bend instruction for Letter Y.
Second bend instruction for Letter Y.
Final steps for completing Letter Y.
Lists materials needed for Letter Z.
Preparation steps before bending Letter Z.
First bend instruction for Letter Z.
Second bend instruction for Letter Z.
Final steps for completing Letter Z.
Lists all parts of the bender with descriptions.
Overview of Clarke's product categories.
To Next Page