Need help?Do you have a question about the Clarke VAC KING Series and is the answer not in the manual?
General| Brand | Clarke |
|---|---|
| Model | VAC KING Series |
| Category | Vacuum Cleaner |
| Language | English |
Welcome and overview of the VAC KING vacuum cleaner's capabilities for wet and dry use.
Details on the 12-month guarantee against faulty manufacture and its invalidation conditions.
Information regarding the product's disposal according to WEEE regulations for environmental safety.
Precautions for operating in areas with flammable liquids or gases due to motor sparks.
Guidelines for user alertness, avoiding over-reaching, and keeping the machine away from children.
Instructions on reading the manual, maintaining cleanliness, handling damaged parts, and cable care.
Turn off, disconnect power, and stow the cable safely to prevent tripping hazards.
Clean casing with a dry cloth, avoid solvents, and store in a secure, dry place away from elements.
Use only recommended parts/accessories and consult professionals for repairs to avoid damage or injury.
Ensure voltage matches rating, handle plug correctly, and replace damaged parts safely.
Instructions for connecting the power cable wires (Blue=Neutral, Brown=Live) to the plug terminals.
Instructions for connecting the power cable wires (Blue=Neutral, Brown=Live, Yellow/Green=Earth) to the plug.
Steps for unpacking, checking components for damage, and fitting castors to the CVAC base.
Explanation of the essential role of filters (foam, cartridge, paper bag) in protecting the motor and air quality.
Use foam filter for water, and cartridge/paper filters for dry vacuuming, following specific fitting instructions.
Check filters/bag, position machine on a firm, level surface with ventilation, and keep upright.
Always use the handle to move the CVAC; never lift or strain the hose or cable.
Monitor water level during pick-up; float stops suction to prevent motor overheating.
Use the auxiliary socket for power tools as a dust extractor; it auto-starts and stops with the tool.
Inspect, clean, or replace filters as needed. Wash and dry linen bags.
Ensure hose is in good condition and periodically inspect/replace other components like castors.
To Next Page
