Clarke Carpet Master 30 User Manual

Carpet Master 30
Wide Area Vacuum
Form No. 70796A 5/06 Clarke
®
Printed in the U.S.A.
This book has important information for the use and safe operation of this machine. Failure to read this
book prior to operating or attempting any service or maintenance procedure to your Clarke machine
could result in injury to you or to other personnel; damage to the machine or to other property could occur
as well. You must have training in the operation of this machine before using it. If your operator(s) cannot
read this manual, have it explained fully before attempting to operate this machine.
All directions given in this book are as seen from the operator’s position at the rear of the machine.
For new books write to: Clarke
®
, 2100 Highway 265, Springdale, Arkansas 72764.
English (2 - 7)
Español (8 - 13)
Français (14 - 19)
READ THIS BOOK
LEA ESTE MANUAL
LISEZ CE MANUEL
ES
EN
FR
Operator's Manual
Manuel d'utilisation
Libro de Instrucciones

Clarke Carpet Master 30 Specifications

General

Brand	Clarke
Model	Carpet Master 30
Category	Vacuum Cleaner
Language	English

Summary

Operator Safety Instructions

Grounding Instructions

Extension Cord Safety and Usage

Guidelines for selecting and safely using extension cords with the machine, specifying gauge, length, and connection requirements.

Operating Procedures

Machine Preparation for Operation

Steps to ensure the machine is correctly assembled and ready for use, including checking voltage and installing the filter bag.

Machine Operation Guide

Instructions on how to operate the machine safely, including power connection, foot pedal adjustment, and switch controls.

Using Machine Accessories and Tools

Guidance on connecting and using the machine's onboard tools and accessory hose for effective cleaning tasks.

Equipment Maintenance

Weekly Maintenance Checklist

Routine cleaning and inspection tasks for machine filters and general condition, to be performed on a weekly basis.

Vacuum Motor Service and Maintenance

Information on annual inspection of the vacuum motor and potential replacement of carbon brushes by an authorized service technician.