CLARUS PARTS/WEAPONS CLEANING SERIES
OPERATOR’S MANUAL
I. INTRODUCTION
Congratulations on your purchase of the Clarus Parts/Weapons Cleaning Series (models
PCS-15/25; WCS-15/25; RPW-15/25; RWC-15/25)! This equipment series is the
product of Clarus engineering and manufacturing. They are made of the finest materials
under a rigid quality control system. With proper care they will give you long and
satisfactory service.
To obtain the best use of your equipment, please read this manual carefully. It will help
you become familiar with the operation of the equipment and contains many helpful
hints about parts/weapons cleaner maintenance.
The instructions and specifications contained in this manual were in effect as of August
2012. Due to the policy of Clarus Technologies, LLC to continually improve its
products, however, modifications in these specifications may be made at any time.
This Operators Manual was compiled for your benefit. By reading and following the
safety, setup, operation, and trouble-shooting instructions described in the manual, you
should receive many years of trouble-free operation. Familiarize yourself with the
names of the parts/weapons cleaner components, which appear as capitalized terms
throughout this manual. Read this entire manual before attempting to start and
operate the Clarus Parts/Weapons Cleaner.
To Next Page
Loading...
Need help?
General
