EasyManuals Logo
Home>Clarus Technologies>Other>PCS-25

Clarus Technologies PCS-25 User Manual

Clarus Technologies PCS-25
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
X. SOLVENT, FILTERS AND REPLACEMENT PARTS
Item No.
Item
Description
1156-5
Solvent - 5 gallon Type II-A
MIL-PRF-680 Type II specification solvent in a 5-gallon pail.
1156-5
Solvent - 15 gallon Type II-A
MIL-PRF-680 Type II specification solvent in a 15-gallon pail.
1156-55
Solvent - 55 gallon Type II-A
MIL-PRF-680 Type II specification solvent in a 55-gallon drum.
250-SS-5
Solvent - 5 gallon Type V
MIL-PRF-680 Type IV specification solvent in a 5-gallon pail.
250-55
Solvent - 55 gallon Type V
MIL-PRF-680 Type IV specification solvent in a 55-gallon drum.
1157-5
Solvent - 5 gallon Type II-B
Solvent conforms to MIL-PRF-680 Type II. 5-gallon pail.
1157-55
Solvent - 55 gallon Type II-B
Solvent conforms to MIL-PRF-680 Type II. 55-gallon drum.
WP680SR
Solvent Tank Filters (case)
0.5 micron filters in a case of four.
WP680SR-01
Solvent Tank Filter (each)
0.5 micron filters individually.
113253 (PCS-0031
Filter gauge
A gauge telling you when to change the filters
113252
Fluid level indicator
Indicator for solvent levels
PCS-0005
Soak Tank Pump
A pump for agitating parts in the soak tank.
PCS-0029
Control Box for Soak Tank
The electrical control box for the soak tank. Contains switch
and cord.
PCS-0036
Grey Plastic Bin for Pre-Clean
Pre-cleaning bin to collect debris.
PCS-0037
Pre-Clean Shelf Tray Liner
Lines the pre-clean shelf.
PCS-0058
Air gun hose
Replacement hose for the air gun.
AGOAPP
Onboard Air Pump Option
The optional pump and regulator for use with the air gun.
PCS-0057
Air Gun replacement
Includes only the air gun.
PCS-0001
Light Bar Assembly
Halogen light fixture with attaching bar, fusible link and
halogen bulb.
PCS-0002
Wand Nozzle
PCS-0003
Wand Valve
Valve to turn on/off nozzle
PCS-0004
Main Solvent Pump
The pump that circulates the solvent through filtration.
PCS-0006
Misc. 1/2" Hose per foot
The red solvent hose, 1/2"
PCS-0007
Misc. 3/8" Hose per foot
The red solvent hose, 3/8"
PCS-0008
Plug
Plastic plugs (specify size)
PCS-0010
Hose Clamp Large
Waste Hose Clamp
PCS-0011
Fusible Link
The fusible link
PCS-0012
Switch (for light/soak pump)
The switch for the light and soak tank (option)
PCS-0013
Main Switch (gr push button)
The green, ON push button.
PCS-0015-36
Molded Cord - 36"
Power cord, 36" long
PCS-0015-96
Molded Cord - 96"
Power cord, 96" long
PCS-0016
Fuse Holders (rectangular
grey)
Fuse holder for current models. Rectangular grey plastic holder,
located inside electrical box.
PCS-0017
Clamp, Solvent Brush
Clamps solvent hose to brush.
OC-1294
Fuse Holder (round black)
Fuse holder for older machines. Round black holder, located on
outside of electrical box.
PCS-0019
Drain Screen
Metal screen for the drain.
PCS-0022
Guzzler/Sump Pump
The hand pump for draining the sludge.
PCS-0023
Light Bulb
Halogen light bulb
PCS-0024
Replacement Solvent Brush
Replacement Solvent Brush
PCS-0025
Brush Hose (yellow) 4'
Yellow brush hose, 4' long
PCS-0026
Fuses
10-amp fuse
PCS-0027
Lid O-Ring Viton - Filter
Canister
Filter canister lid o-ring
PCS-0028
Switch contact block
Contact block for the two-position switch.
PCS-0030
Lid Clips
The clip that holds the lid open.
PCS-0031
Pressure Gauges
The filter pressure gauge

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarus Technologies PCS-25 and is the answer not in the manual?

Clarus Technologies PCS-25 Specifications

General IconGeneral
BrandClarus Technologies
ModelPCS-25
CategoryOther
LanguageEnglish

Related product manuals