English
GREAT BRITAIN • customer service
tel: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk
3
1
2
4 7
5 6
8 11
9 10
12 15
13 14
16 19
17 18
20
21
22
Ver. 20160707
Remote Control
for iDual mood
lighting
Art.no 36-6090
Model PP-iDual-IR iD RC
Please read theentire instruction manual
before using theproduct and then save it for
future reference. We reserve theright for any
errors in text or images and any necessary
changes made to technicaldata. In theevent
of technical problems or other queries, please
contact our Customer Services.
Safety
• Never subject theproduct to high
temperature, dust, heavy vibration,
impacts, humidity or moisture.
• Theproduct is intended for indoor useonly.
• Never mix old and new batteries and
never mix rechargeable batteries with non-
rechargeable batteries.
• Never attempt to dismantle theproduct, it
contains no user-serviceableparts.
Care and maintenance
• Clean theremote control by wiping it with
adrycloth.
• Remove thebatteries from theremote
control if it is not to be used for alongtime.
Buttons and functions
1. On
2. Off
3. Dimming: hold thebutton in or press it
repeatedly todim. Note: Dimming is only
possible when one of thelight modes 4–7
and 10–11 isused. Itis also possible to dim
when one of thebuttons for fixed colour
(20) has been pressed.
White lights
4. Candlelight
5. Warmwhite
6. Neutralwhite
7. Coldwhite
White scenes
8. Nightlight
9. Sleeping: initiates sleep mode, thelight
dims gradually until fully off after 21 minutes
10. Working
11. Relaxing
Colour scenes
12. Sunrise: initiates wake-up mode,
reproduces thelight of asunrise until full
intensity is reached after 8 minutes and
30seconds
13. Pastel
14. Party
15. Sunset
16. Forest
17. Lappingwater
18. Fireplace
19. Romantic
Fixed colours
20. Select fixed colour: press to select themain
colour of your choice, press and hold in one
of theother adjacent fixed colour buttons
to gradually change thecolour. There are
4 main colours and 7 intermediate colours
between each 2 main colours.
21. Colour saturation: press to increase/
decrease in three stages.
Function selector
Batteries
1. Remove thebattery cover on theback
of theremote control by sliding it in
thedirection of thearrow.
2. Insert 3×AAA/LR03 batteries.
Notethepolarity markings on thebottom of
thebattery compartment to ensure correct
insertion.
3. Slide thebattery cover back intoplace.
Responsible disposal
This symbol indicates that this
product should not be disposed
of with general household waste.
This applies throughout the entire
EU. In order to prevent any harm
to the environment or health
hazards caused by incorrect waste disposal,
the product must be handed in for recycling
so that the material can be disposed of in
a responsible manner. When recycling your
product, take it to your local collection facility
or contact the place of purchase. They will
ensure that the product is disposed of in an
environmentally sound manner.
Specifications
Batteries 3×AAA/LR03
Range Selectable 6 m or 3 m
Operating temperature −5 to 40 °C
22. Function selector for selecting the
type of target zone.
- Wide-angle and long range
< 6 m, suitable for controlling
multiple lights simultaneously.
- Narrow-angle and short range
< 3 m, suitable for controlling
one light (or several close
together).
Note:
• When theconnected light is switched
off using theremote control, thecurrent
light settings will be saved until thelight is
switched onagain.
• If thepower to thelight is cut, thelight will
start in warm white light mode when it is
switched onagain.