8
English
6. Radio
FM och AM (medium wave)
1. Set the [FUNCTION] selector [15] to the TUNER position.
2. Set the band selector [16] to the AM, FM (mono) or FM-ST (stereo) position.
3. Set the desired frequency with the tuning knob (21).
4. Place the aerial (32) in a position where you receive the best possible reception.
5. Adjust the volume level by using the volume buttons, [VOLUME +] (7) and [VOLUME -] (8).
Receiving the best reception
AM: The player has a built-in aerial for AM reception. Reception can be altered by
either turning or moving the player.
FM: The aerial should be completely unravelled to receive the best reception.
7. CD player
7.1 CD playback
1. Set the [FUNCTION] selector (15) to the CD/USB/SD position.
2. Open the CD tray by pressing [OPEN/CLOSE] (11).
3. Place a CD (Audio disc or CD-R/CD-RW) with the label side upwards into the CD tray.
4. Press [OPEN/CLOSE] (11) to close the CD tray.
5. The display will show the total number of tracks once the CD info has been read.
6. Press [►II/
■
] (2) or (39) to start playback. The first track should then begin playback.
7. To pause playback, press [►II/■ ] (2) or (39) again. The display will then begin flashing the current
track number. Press [►II/
■
] (2) or (39) again to resume playback.
8. To stop playback: Depress [►II/■ ] (2) or (41) for 2 seconds.
7.2 Selecting a different track
During playback or in pause mode you can use [►►I] [I◄◄] (3) or (40) to select another track.
1. Press [►►I] [I◄◄] (3) or (40) briefly to move to the next track, or press repeatedly until the desired
track number is shown in the display.
2. Press [►►I] [I◄◄] (3) or (40) briefly to return to the start of the previous track. Press several times
to return to previous tracks.
7.3 Searching for a section during playback.
1. Press and hold [►►I] [I◄◄] (3) or (40) to search within a track. The CD will play at high speed and low volume.
2. Release the button when you have reached the desired section. Normal playback should now resume.
7.4 Playing a CD containing MP3 files
1. Set the [FUNCTION] selector (15) to the CD/USB/SD position.
2. Open the CD tray by pressing [OPEN/CLOSE] (11).
3. Place a CD (Audio or CD-R/CD-RW containing MP3 files) with the text side upwards in the CD compartment.
4. Close the CD tray by pressing [OPEN/CLOSE] (11).
5. After a moment the track total will be shown in the display.
6. Press [FOLDER] (4) or (42) once or several times to select a folder for playback. The folder number
will be displayed.
7. Use [►►I] [I◄◄] (3) or (40) to select the desired track within the selected folder.
8. Press [►II/
■
] (2) or (39) to start playback.
9. To pause playback: Press [►II/
■
] (2) or (39) again to pause. The display will then begin flashing
the current track number. Press [►II/
■
] (2) or (39) again to resume playback.
10. To stop playback: Depress [►II/
■
] (2) or (39) for 2 seconds.
To Next Page
Loading...