EasyManua.ls Logo

Clas Ohlson TTAF-801D - Before Using for the First Time; Using the Product

Clas Ohlson TTAF-801D
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
English
Before using for thefirst time
Remove all packaging.
Wash thepan and therack thoroughly before use. Use only mild cleaning agents.
Never use solvents or corrosive chemicals.
Rinse thepan and therack thoroughly and make sure that they are completely dry before use.
Small items of food generally require ashorter cooking time than larger items.
A larger amount of food will require only aslightly longer cooking time.
A smaller amount of food will require only aslightly shorter cooking time.
Small items of food should be shaken halfway through their cooking time for abetter result.
Brushing chips or french fries with alittle oil will make them crisper.
Avoid cooking very fatty foods such as sausages.
Using theproduct
1. Connect themains lead to anearthed wall socket.
2. Remove thepan from one of theair fryers. Never use thepan without therack.
3. Place thefood in thepan. Never fill thepan above theMAX mark.
4. Slide thepan into theair fryer, making sure that it is fully inserted.
5. Press and hold
to switch theair fryer on.
6. Select which fryer to use by pressing
or . The respective button will flash.
7. You can select whether you want to set thetime and temperature manually or from thehot
key menu (16) here.
- Manual setting: Enter thetime and temperature using
. The oven will automatically
switch between time and temperature, but if you want to change manually, press
.
- Hot key menu: To select options from thehot key menu, press
once or repeatedly.
The relevant menu will flash.
8. Press
to start cooking.
On/off and pause
The time and temperature can only be changed in pause mode.
While theproduct is in use, select fryer
or and then press to pause cooking.
Press and hold
to switch theselected fryer off completely. “OFF” will flash.