CLAS EQ 3000 - MACHINE CALIBRATION; CAR;SUV Wheel Type Calibration; Required Calibration Materials

MACHINE CALIBRATION
To function properly, the machine must be calibrated. Calibration allows storing the mechanical and electrical
parameters specic to each machine so provide the best balancing results.
Machine calibration for the CAR/SUV Wheel Type
The calibration for the CAR wheel type and SUV wheel type is the same.
To perform machine calibration, you must rst provide for the following material:
• A balanced wheel with steel rim that has the following dimensions: diameter from 14” ÷ 16”.
It is not possible to use wheels with aluminum rims.
• A 50 grams weight (preferably in Iron or Zinc).
To perform the calibration machine, proceed as follows:
EQ 3000
AUTOMATIC WHEEL BALANCER 3D WITH LCD SCREEN