AUTOMATIC WHEEL BALANCER 3D WITH LCD SCREEN
The illuminator is quite useful because it allows shedding light on the internal part of the rim.
To activate and/or deactivate the ILLUMINATOR proceed as follows:
The illuminator is also automatically managed by the machine that turns it on in the following cases:
• When the Distance/Diameter sensor is extracted;
• After a wheel stop procedure on the position of imbalance (wheel stop procedure) which resulted in the balancing position of the
internal weight;
• When the wheel itself is in the balancing position of the internal weight by manually rotating the wheel after a launch.
ILLUMINATOR
To Next Page
Loading...