To Next PageTo Next PageWhy is there not enough headroom in my Classic Accessories Snow Blower cab?
If you are experiencing a lack of headroom with your Classic Accessories Snow Blower cab, it's likely because the upper horizontal mounting bar [A, B1 and B2] is mounted too low. To resolve this, rotate the cab forward and raise the attachment point.
What to do if Classic Accessories 52-086-010401-00 cab front interferes with controls?
If the cab front of your Classic Accessories Snow Blower is interfering with the snow thrower controls, the upper horizontal mounting bar [A, B1 and B2] is likely mounted too low. To fix this, rotate the cab forward and move the cab sideways.
Key safety guidelines to follow before operating the snow thrower with the cab.
Detailed list of hardware and structural components included in the package.
Steps for attaching the mounting system to the snow thrower.
Instructions for attaching the fabric shell to the assembled frame.
Steps to secure the fabric shell to the frame using tabs and straps.
Steps for mounting the complete cab assembly onto the snow thrower.
General| Brand | Classic Accessories |
|---|---|
| Model | 52-086-010401-00 |
| Category | Snow Blower |
| Language | English |
