EasyManua.ls Logo

Classic Fire CHICAGO - Intended Use; Technical Specifications; Scope of Delivery

Classic Fire CHICAGO
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Electric replace AJ55C-LED / AJ55C-LED-RC
Introduction
Unfold the page with the illustrations and become
acquainted with the functions of the unit before putting it
into operation for the rst time. In order to do so, please
read the following operating and safety instructions. Only use the unit
as described and for the indicated range of operation. Keep these
instructions in a safe place. Please also hand over all documents to
third parties when passing on the unit.
Intended use
The unit is intended for the generation of hot air in closed, dry rooms.
The unit is intended for installation into existing replaces. The electric
ame simulator conveys a log re atmosphere. Other types of use
or modications of the unit are not regarded as intended and pose
serious danger of accidents.
The manufacturer is not liable for any damages caused by any use
other than for the intended purpose.
The unit is designed for use in private households and not suitable for
industrial purposes.
Technical specications
Model: AJ55C-LED / AJ55C-LED-RC
Nominal voltage: 230 V ~, 50 Hz
Rated power: max. 1.800 W
Power stages: 2 (900 W, 1.800 W)
Illuminants: 2 x 1 W LED
Dimensions: 67 x 23 x 62 cm (w x d x h)
Installation
dimensions: 58 x 22 x 54 cm (w x d x h)
Weight: approx. 14.8 kg
Scope of delivery
Immediately after unpacking please check if the delivery is complete
and also if all parts of the product are in good condition.
1 Fireplace insert, electric
1 Operating instructions Avoid injuries and damages of the electric unit

Table of Contents

Related product manuals