Classic Eco1 - The Appliance; Installation

2
2
.
.
0
0
T
T
h
h
e
e
a
a
p
p
p
p
l
l
i
i
a
a
n
n
c
c
e
e
2.1 Unpacking :
Use suitable means and protective equipment to avoid injury whilst
unpacking and handling the appliance. Remove all outer packaging and
the protective film from the outer panels of the appliance prior to
installation.
Ensure all packing materials are disposed of in accordance with local
regulations.
2.2 Items included :
The following items are included within the appliance
• 2 x Baskets
• 1 x Cutlery basket (Dishwashers only)
• 1 x Water inlet hose
• 1 x Drain hose (Gravity drain machines only)
• 2 x Bottle weight kits (for Rinse Aid and Detergent tubes)
• 1 x Installation and Operation Instructions (Must be left with the
customer)
• 1 x Warranty card (Must be left with the customer)
3
3
.
.
0
0
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
3.1 The site :
Ensure that there is sufficient space for the installation, servicing and easy
access to all mains isolator switches / valves (i.e. electricity and water).
Ensure that the surface the appliance is going to be installed onto is
adequately stable and capable of supporting the appliance during normal
operation, listed below are the approximate machine weights when fully
laden during normal operation.
Once installed ensure that the appliance is stable and secure, with its
weight being distributed equally and does not tilt more than 3°in any
direction.
Machine sizes Weight
350mm² basket 75 Kgs
400mm² basket 90 Kgs
500mm² basket 135 Kgs
Page 2