CleanCraft flexCAT Series - Imprint; Product identification; Manufacturer; Operating instructions information

2 flexCAT-Series | Version 1.04
Imprint
Product identification
Special Vacuum Cleaner Item number
flexCAT 112 Q 7003135
flexCAT 116 Q 7003140
Manufacturer
Stuermer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Fax: 0049 (0) 951 96555 - 55
E-Mail: info@cleancraft.de
Internet: www.cleancraft.de
Indications regarding the operating instructions
Original instructions
Edition: 09.01.2020
Version: 1.04
Language: English
Author: ES
Indications regarding the copyright
Copyright © 2020 Stürmer Maschinen GmbH, Hallstadt,
Germany.
The contents of these operating instructions are the sole
property of the company Stürmer.
Passing on as well as copying of this document, the use
and distribution of its content are prohibited if not explic-
itly permitted. Contraventions are liable to compensa-
tion.
Subject to technical modifications and error.
Content
1 Introduction .............................................................3
1.1 Copyright............................................................ 3
1.2 Customer service................................................ 3
1.3 Limitation of liability ............................................ 3
2 Safety........................................................................3
2.1 Symbol explanation ............................................ 3
2.2 Obligations of the operating company............... 4
2.3 Requirements to staff.......................................... 5
2.4 Personal protective equipment........................... 5
2.5 General safety regulations.................................. 5
2.6 Safety labels on the vacuum cleaner ................. 6
3 Intended use ............................................................6
3.1 Unintended use .................................................. 7
3.2 Residual risks ..................................................... 7
4 Technical Data.........................................................7
4.1 Type plate........................................................... 8
5 Transport, packaging, storage...............................8
5.1 Transport ............................................................ 8
5.2 Packaging........................................................... 8
5.3 Storage ............................................................... 8
6 Description of the device........................................8
6.1 Assembly.......................................................... 10
7 Scope of delivery...................................................12
8 Operation ...............................................................13
8.1 Start and stopping............................................ 14
8.2 Controlling of the seal....................................... 14
9 Care, maintenance and repair..............................14
9.1 Care by cleaning .............................................. 14
9.2 Maintenance and repair ................................... 14
10 Disposal, recycling of used devices..................15
10.1 Decommissioning.......................................... 15
10.2 Waste disposal of electric equipment ............ 15
10.3 Disposal of lubricants..................................... 15
10.4 Disposal of the filter........................................ 15
11 Malfunctions ........................................................15
12 Spare parts...........................................................16
12.1 Ordering spare parts...................................... 16
12.2 Spare parts drawings ..................................... 17
13 EU-Declaration of Conformity............................21