It is essential to read through the operating manual before commissioning the machine. The manual provides you
with all information that you need for proper, safe and correct use and maintenance of the product. It must be kept
handy for the operator at
The operator is responsible for the following:
All operators have read and understood the operating manual before using the machine.
In particular, all operators know the safety regulations and what they mean.
All operators have received training specific to the product in the use/handling of the machine
Conducting periodic examinations of operators and their handling of the machine.
Ensuring adherence to the acknowledged rules for occupational safety.
adherence to any additional statutory or company regulations.
Clearly defining responsibilities for operation, maintenance and repair of the machine and ensuring that these
responsibilities are maintained.
Immediate notification of breakdowns and damage t
Further mandatory requirements:
During work, operator must be mindful of other persons, especially of children
Sturdy footwear must be worn to prevent injury.
When changing or dismantling operating elements or parts, always remove th
operated main switch or mains
plug for cleaning and maintenance of the machine.
When leaving the machine, secure against unintentional motion, and remove the key
operated main switch or mains
plug for cleaning and maintenance of the machine.
ving the machine, secure against unintentional motion, and remove the key
operated main switch and isolate
This equipment is not intended to be used by persons (including children) with restricted physical, sensory or mental
ho have no experience and/or knowledge of its use, unless supervised by a person who is responsible for
their safety, or they have received instructions from this person on how to use the equipment.
Children should be monitored in order to ensure that they
do not play with the equipment.
Use only cleaning agents approved by the manufacturer.
Take note of manufacturer’s information on the hazards posed by cleaning
and care agents; if necessary, wear
protective goggles and protective cloth
Express reference is made to the hazards when using highly inflammable, combustible, toxic, health
corrosive or irritant substances
ACCESSORIES AND SPARE PARTS
Use only original operating elements, spare parts and accessories.
Immediately exercise first aid or seek assistance .
After any incidents, do not reactivate the machine until manufacturer has inspected the machine.
The machine is designed in line with current technology and in conformity with recognized safety regulations. It has
undergone inspection of electrical systems and conforms with European safety standards ( CE) It has various circuit
breakers that act as protection systems. Hazards can nevertheless arise, chiefly through improper use or infringements
of safety regulations and instructions set out in the operating manual. We reserve the right at any time to make
to the machine in addition to consumables and accessories. For this reason, discrepancies may
exist between certain details about the machine and what is set down in the operating manual.