20
• Dynamic DNS Information (Domain Name Service): This is a mechanism used for translating
host names for network nodes into IP Addresses in real time. Use these fields to configure a
Dynamic DNS service.
• Enable DDNS: Allows you to enable Dynamic DNS.
• DDNS Service Provider: Select the type of service provider that is used.
Manage your CLEAR Hub Express (continued)
CLEAR Hub Express Home Page / Advanced Settings / Router (continued)
• Universal PnP: Universal Plug and Play (UPnP) Internet Gateway Device (IGD) is a protocol that
simplifies device connection and network implementation. When this option is enabled, certain
Windows applications would setup the Port Forwarding rule dynamically.
• Enable UPnP IGD: Allows you to enable UPnP IGD, if any.
• DMZ Host: Put a device connected to the CLEAR Hub Express in the DMZ (Demilitarized Zone)
so that the device can be accessed by external hosts.
• Configuring this option requires entering the IP Address of the host.
• Port Forwarding: This allows you to forward specific external ports to host devices connected to
the CLEAR Hub Express.
• Add: Enter the host IP Addresses and the port to be forwarded in order to set up the route.
• Delete: Select items to delete in order to cancel the route.
To Next Page
Loading...