4
Set up the Device
Place the device on a flat and stable surface
Align the slots at the bottom of the device with the slots on the Device Foot. Push gently on the Device to
snap the Foot onto the device.
To remove the Foot, press both tabs outward at the same time and the Foot will release from the slots.
Do not place the device on its side or block the top air vents. The preferred location is near a window and
away from obstructions.
Plug in the Power Cord
Follow the diagram below to plug in the Power Cord.
After you’ve plugged the device into a power outlet, the device will automatically search for a CLEAR 4G signal.
Plug one end of the Power
Cord into the AC adapter port
on the device and plug the
other end into a power outlet.
To Next Page
Loading...
Need help?
General
