6
Set up the Device (continued)
Connect to the Wi-Fi Network
• From a computer, select to connect to the SSID (network name). The device’s SSID will be visible in the
wireless network connection list.
• Connect to the device’s Wi-Fi network. The default Wi-Fi network name is “WiFiRSU-xxxxx”, where “xxxxx”
are the last five digits of the MAC ID, which can be found on the label on the back of the device. The MAC
ID also might be referred to as WAN MAC ID.
• Enter the default Wi-Fi password. The default Wi-Fi password is comprised of the last eight digits of the
MAC ID, which can be found on the label on the back of the device.
• Your computer should display a message indicating it has connected to your device’s wireless network.
Alternative to Wi-Fi
As an alternative to Wi-Fi, you also can use the included Ethernet Cable to connect to the device.
Set up the Device (continued)
Connect to the Internet
Every CLEAR customer gets an online account, so you easily can manage your account and view / pay your bill.
The first time you connect to the internet with your device, you’ll be directed to a page to review your rate
plan information, complete your CLEAR online account, and read / accept the CLEAR Terms of Service.
Plug one end of the Ethernet Cable into
the ethernet port on the computer and
plug the other end into the ethernet
port on the Device.
To Next Page
Loading...