WiFi Network
Connection
(Example)
Wi-Fi Network
Name (SSID)
Signal Strength
Bar LED
Wi-Fi LED
4G LED
Power LED
Step 1: SET IT UP
• SnapthefootontotheCLEARHubExpress
andpluginthepowercord.
• TheLEDlightsontheSignalStrenghtbarwill
blinksequentiallyantheninunison.When
theLEDlightsstopblinking,yourCLEAR
HubExpressisreadytoconnecttoany
Wi--enableddevice
QUICK TIPS
• If youare using a wirelessdevice other than
acomputer,refer tothatproduct’sguidefor
connectingto thewireless network.Besure
toselecttheCLEARWiFiRSUNetworkName
andWi-FiPassword.
• PriortousingyourCLEAR®4Ginternet
service,youmustrstactivateyourCLEAR
HubthroughaPCorMac®device.
Step 2: CONNECT
• ConnecttheHubtoyourPCorMac®device
usingWi-FiNetworkName(SSID)andWi-Fi
DefaultPasswordprintedonthebackofthe
Hub.
• Onyourcomputer,opentheWirelessNetwork
Connectionlocatedatthebottomright-hand
cornerofyourcomputerscreen.Selectthe
deviceWi-Finetworknameandenterthe
Wi-Fipasswordwhenprompted.
UNDERSTANDING
THE LEDS:
• Theashing4GLED
lightmeansthedevice
issearchingforthe
CLEAR®signal.
• Oncethedevicehas
connectedtothe
CLEAR®signal,the4G
LEDlightwillremain
solidtoindicateitis
connected.
• Fivesolidlightsonthe
signalstrengthbar
WiFi Network Connection
PC Users Open Wi-Fi Network Connection
PowerCord
Mac® Users Open Wi-Fi Network Connection
Step 3: COMPLETE ACCOUNT SET-UP
• Openyourbrowserandgotoanywebsiteand
youwillbere-directedtotheCLEARwebsite.
• Followtheonlineinstructionstoquickly
completethisimportantstep.
• That’sit!GetonlineanywherewithinCLEAR®
coverage.
MANAGE YOUR DEVICE
• YoucanmanageyourCLEARHubExpress
anytimeyouareconnectedbytyping
http://clearmodemorhttp://192.168.15.1
inyourbrowseraddressbar.Thedefault
passwordis“admin”.
(Example)
Wi-Fi Network
Name (SSID)