Clearaudio Concept MC - Page 12

Page / Seite 12 © clearaudio electronic GmbH
User manual / Bedienungsanleitung
Poor
sound
quality /
noise
Is the record or
stylus dirty or
damaged?
Clean the record / cartridge.
Clearaudio oers many useful
accessory products for maintenance
and cleaning. If there‘s damage, we
recommend assessment by a specialist
and possibly replacement.
Is the cartridge
properly
installed on the
tonearm?
Check the installation according to the
respective user manual and adjust if
necessary.
Is the tracking
force set too
low/high?
Adjust the tracking force.
Is the correct
operating mode
(MM / MC)
selected on the
amplier?
Check the settings on your phono
preamplier.
Sound
output
on only
one
speaker
Are the
connections
properly
attached?
Inspect the connections of the
cartridge. Are they correctly attached
according to the color coding? Are they
securely fastened?