EasyManua.ls Logo

Clearaudio Concept MC - Intended Use; Placement; Overloading; Maintenance

Clearaudio Concept MC
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page / Seite 4 © clearaudio electronic GmbH
User manual / Bedienungsanleitung
2. Intended Use
Cartridges are intended solely for mounting on tonearms and must not be
used for purposes other than this.
NOT SUITABLE FOR SHELLAC RECORDS (78rpm).
The intended use of the cartridge involves using it in accordance with the
information provided in the user manual.
3. Placement
Avoid locations with direct sunlight, temperature uctuations, and high
humidity. Similarly, do not place electronic devices near heaters, heat
lamps, or other devices that emit heat. The cartridge is designed for
operation in heated rooms.
4. Overloading
The product is engineered to comply with all necessary safety regulations.
However, do not leave the device unattended under extreme stress.
5. Maintenance
Please clean each record with a record cleaning machine before the
initial playback. This will result in signicantly quieter music reproduction
(approximately 10dB improved signal-to-noise ratio!).
Regularly clean the stylus with a soft brush or a cleaning uid available
from specialty retailers (Clearaudio Elixir of Sound, Part No. AC003).
Ensure that no uid comes into contact with the cartridge body.
6. Health Advice
Sustained exposure to high volume can lead to various auditory
impairments. Exercise responsible use of high volume levels.

Related product manuals